Hurray Jimmy... You got extended. I knew you would. Hurray, way to go Jimmy....

Where be you? I just tried calling you and got your voice mail...

Some possibilities are openning up for me.

So, did you ever interview with RJ?

Some people pulled for me really hard, and I gotta say, its been a little emotional for me.
We've been travelling for what seems like forever and I haven't had a real home for what seems like a very, very long time.
These people have become as close to friends as I guess I'll ever have. And I'm happy.
These are the good people that I've been looking for.
They are the ones that I've always wanted to know.

?section GO  macro
== ****************************************************************************
== * GO program|macro|routine                                                 *
== * GO FUP INFO *.*                                                          *
== *--------------------------------------------------------------------------*
== * Runs a program, showing its command line                                 *
== ****************************************************************************
#output %*%
%*%

?section VAR macro
== ****************************************************************************
== * VAR variable [value]                                                     *
== * VAR MyVar    This is a test                                              *
== *--------------------------------------------------------------------------*
== * Pushes a variable if it doesn't already exist.                           *
== * If [value] is supplied, set it, otherwise, preserve the old value.       *
== ****************************************************************************
[#if [#variableinfo/existence/ %1%] |else| #push %1%]
[#if [#empty %2%] |then| |else| #set %1% %2 to 99%]

?section CompAll    macro
== ****************************************************************************
== * COMPALL [file mask] [;list] [$S]                                         *
== *--------------------------------------------------------------------------*
== * Gets a list of file names using the file mask                            *
== * Volumes to where the file is                                             *
== * Compiles the program based on its contents                               *
== * Volumes back to where you started                                        *
== ****************************************************************************
var   Param1 %1%
#push Param2 Param3
var   Param2 %2%
var   Param3 %3%
var   NoList ;nolist
#set  NoList
var   tst_lst
#set  tst_lst
[#case [#chargetv Param1 1 1] |;| #set NoList  [Param1] |otherwise|]
[#case [#chargetv Param2 1 1] |;| #set NoList  [Param2] |otherwise|]
[#case [#chargetv Param1 1 1] |$| #set tst_lst [Param1] |otherwise|]
[#case [#chargetv Param2 1 1] |$| #set tst_lst [Param2] |otherwise|] #push MyFile FileList
fup /outv FileList/info %1%
#extractv FileList MyFile
#extractv FileList MyFile
#extractv FileList MyFile
var CompVol [#FILEINFO/VOLUME/x].[#FILEINFO/SUBVOL/x]]
[#loop |do|
   [#case [#chargetv MyFile 1 1]
   |$| VOLUME [MyFile]
   |otherwise|
      #set MyFile [#chargetv MyFile MyFile 1 8]
      COMPILE [MyFile]
   ]
   #extractv FileList MyFile
|until| [#emptyv FileList]
]
VOLUME [CompVol]
#pop MyFile FileList

?section COMP macro
var  tst_lst
#set tst_lst
var nolist ;nolist
var tst_src %1%
[#if [#fileinfo/existence/[tst_src]] |then|
   COMPILE %*%
|else|
   #output *** ERROR: %1% Does not exists
]

?section COMPF macro
var tst_src %1%
var tst_lst ,OUT LISTING.[tst_src]
var nolist
#set nolist ;nolist
[#if [#fileinfo/existence/[tst_src]] |then|
   COMPILE %*%
|else|
   #output *** ERROR: %1% Does not exists
]

?section COMPP macro
var tst_src %1%
var tst_lst ,OUT $P.#COMP.[tst_src]
var nolist
#set nolist ;NOLIST
[#if [#fileinfo/existence/[tst_src]] |then|
   COMPILE %*%
|else|
   #output *** ERROR: %1% Does not exists
]

?section COMPILE macro
var tst_lst
var nolist
var #INLINEPREFIX --
var tst_src %1%
var Src_Root [#charget tst_src 1 for [#compute [#charcount tst_src] - 1]]
var ThisVol [#FILEINFO/VOLUME/[tst_src]].[#FILEINFO/SUBVOL/[tst_src]] var tst_lib $TECH1D.COPYSRC var tst_all [ThisVol].[tst_src]
var tst_cat  $DEV3.MISCCATL
var tst_pobj $DEV2.TURBOBJ.xxx1
[#case [#charget [#shiftstring tst_src] 1 for 3]
   |EBC|  var tst_OBJ  $DEV2.TECHOB.[src_root]
   |EXP|  var tst_OBJ  $DEV2.EXPOBJ.[src_root]o
          var tst_pobj $DEV2.EXPOBJ.EXP1
          var ComptPobj EXP1
   |EMS|  var tst_OBJ  $DEV2.EMS.[src_root]n
   |ERR|  var tst_OBJ  $DEV2.SUBOBJ.[src_root]o
   |SUB|  var tst_OBJ  $DEV2.SUBOBJ.[src_root]o
   |BAT|  var tst_OBJ  $DEV2.TURBOBJ.[src_root]o
   |ENF|  var tst_OBJ  $DEV2.TURBOBJ.[src_root]o
   |DJL|  var tst_OBJ  $DEV2.TURBOBJ.[src_root]o
   |xxx|  var tst_OBJ  $DEV2.TURBOBJ.[src_root]o
          var ComptPobj xxx1
   |FLX|  var tst_OBJ  $DEV2.TURBOBJ.[src_root]o
   |FSR|  var tst_OBJ  $DEV2.TURBOBJ.[src_root]o
   |GBP|  var tst_OBJ  $DEV2.TURBOBJ.[src_root]o
   |PRG|  var tst_OBJ  $DEV2.TURBOBJ.[src_root]o
   |TAL|  var tst_OBJ  $DEV2.TECHOB.[src_root]o
   |TMP|  var tst_OBJ  $DEV2.TURBOBJ.[src_root]o
   |UTL|  var tst_OBJ  $DEV2.TURBOBJ.[src_root]o
   |STR|  var tst_OBJ  $DEV2.STOREOBJ.[src_root]o
   |INT|  var tst_OBJ  $DEV2.WEBOBJ.[src_root]o
   |REP|  var tst_OBJ  $DEV2.WEBOBJ.[src_root]o
   |WEB|  var tst_OBJ  $DEV2.WEBOBJ.[src_root]o
   |OTHERWISE|
          var tst_OBJ  $DEV2.xxxROBJ.[src_root]o
          var ComptPobj xxx1
]
var tmp [tst_src]
#push Found srcLanguage
#set Found
#set srcLanguage
[#if [#emptyv SrcLanguage] |then|
   edit /OUTV Found/[tmp] R;LB/ SCREEN / RB/ SECTION/RN/*/;E
   [#if [#linecount Found] > 2 |then| #set SrcLanguage SCOBOL ]
]
[#if [#emptyv SrcLanguage] |then|
   edit /OUTV Found/[tmp] R;LB/ TERMINAL / RB/ CONVERSATIONAL/RN/*/;E
   [#if [#linecount Found] > 2 |then| #set SrcLanguage SCOBOL ]
]
[#if [#emptyv SrcLanguage] |then|
   edit /OUTV Found/[tmp] R;LB/ TERMINAL / RB/ IBM-3270/RN/*/;E
   [#if [#linecount Found] > 2 |then| #set SrcLanguage SCOBOL ]
]
[#if [#emptyv SrcLanguage] |then|
   edit /OUTV Found/[tmp] R;LB/PROCEDURE / RB/DIVISION/RN/*/;E
   [#if [#linecount Found] > 2 |then| #set SrcLanguage COBOL]
]
[#if [#emptyv SrcLanguage] |then|
   edit /OUTV Found/[tmp] R;LB/ $SYSTEM.SYSTEM.EXTDECS/;E
   [#if [#linecount Found] > 2 |then| #set SrcLanguage Tal]
]
[#if [#emptyv SrcLanguage] |then|
   edit /OUTV Found/[tmp] R;LB/#include/;E
   [#if [#linecount Found] > 2 |then| #set SrcLanguage C]
]
[#if [#emptyv SrcLanguage] |then|
   edit /OUTV Found/[tmp] R;LB/?DICTIONARY /;E
   [#if [#linecount Found] > 2 |then| #set SrcLanguage Enform]
]
[#if [#emptyv SrcLanguage] |then|
   edit /OUTV Found/[tmp] R;LB/?DICT /;E
   [#if [#linecount Found] > 2 |then| #set SrcLanguage DDL]
]
[#if [#emptyv SrcLanguage] |then|
   edit /OUTV Found/[tmp] R;LB/CATALOG / r/=/;E
   [#if [#linecount Found] > 2 |then| #set SrcLanguage SQL]
]
[#if [#emptyv tst_lst] |then|
|else|
   [#if [#fileinfo/volume/[tst_lst]] |then|
      [#if [#fileinfo/existence/listing.[tst_src]] |then|
         PURGE listing.[tst_src]]
         fup CREATE listing.[tst_src], type u, ext(50,50)
      |else|
         fup purgedata listing.[tst_src]
      ]
      #set tst_lst ,out listing.[tst_src]
   |else|
      #set tst_lst ,out [tst_lst].#[SrcLanguage].[tst_src]
   ]
]
comment GO EDIT/INLINE/[tst_all]
comment GO -- CBA/$TECH1D.COPYSRC./COPYSRC./A
comment GO -- CBA/$TECH1.COPYSRC./COPYSRC./A
comment GO -- CBA/$TECH2D.//A
comment GO -- CBA/$TECH2.//A
comment GO -- CBA/?SOURCE ./?SOURCE /A
comment GO -- CBA/ COPYSRC./ / /COPY /
comment GO -- CF/*/  /TIMEFILE-MOD-TIME/ RN/*/
comment GO -- CBA/BLKTJRC/BLKTJRN/A
comment GO -- CA/search "$tech1D./search "/A
comment GO -- EXIT

param    SYMBOL-BLOCKS 8
VOLUME   [tst_lib]
[#case   [SrcLanguage]
|COBOL|  GO COBOL85/IN [tst_all][tst_lst]/[tst_obj][nolist],ENV COMMON
         var ComptNbr 1
|SCOBOL| GO SCOBOLX/IN [tst_all][tst_lst]/[TST_POBJ][nolist]
         var ComptNbr 2 [ComptPobj]
|Enform| GO enform /inline[tst_lst]/
         GO -- ?compile [tst_all] TO [tst_obj]
         GO -- exit;
         var ComptNbr 3
|TAL|    GO TAL    /IN [tst_all][tst_lst]/[tst_obj][nolist]
         var ComptNbr 4
|SQL|    GO SQLCI  /IN [tst_all][tst_lst]/
|C|      GO C      /IN [tst_all][tst_lst]/[tst_obj][nolist], &
         SSV0 "$system.system",SSV1 "$system.ztcpip",SSV2 "$tech1.nos"
==       SSV3 "$tech1d"
         var ComptNbr 5
|DDL|    GO DDL    /IN [tst_all][tst_lst]/
|otherwise| #output Skipping [tst_ALL]
         var ComptNbr 99
]
volume [ThisVol] [#IF (_COMPLETION:COMPLETIONCODE > 1) |then|
     #output **** ERROR ****
|else|
     SqlCheck [tst_obj]
]
[#if [#fileinfo/existence/[tst_obj]] |then|
     RUN $DEV2.CUTLAR.ZFUP SECURE [tst_obj],"nnnn"
     RUN $DEV2.CUTLAR.ZFUP GIVE   [tst_obj],SYSTEM.AOES
] #pop Found
[#if [#empty %2%] |then| |else| COMPILE %2 TO 99%]
========================
?section SqlCheck macro
========================
[#if [#fileinfo/existence/%1%] |then|
   var lstSql
   #set lstSql
   SQLCOMP/IN %1%,outv lstSql/CATALOG [tst_cat]
   [#IF ([#LINEFIND lstSql 1 No SQL source ]>0) |then|
       #output Sql Compiling is not needed for %1%
       #set _COMPLETION
       SaveCompT R [tst_src] [ComptNbr]
   |else|
        #push #out
        #set  #out [tst_lst]
        outvar lstSql
        #pop  #out
        #set _COMPLETION
       [#IF (_COMPLETION:COMPLETIONCODE > 1) |then|
          #output ********** SQL ERROR **********************
       |else|
          [#case [ComptNbr]
           |1| SaveCompT R [tst_src] 6
           |otherwise|
               SaveCompT R [tst_src] [ComptNbr]
          ]
       ]
   ]
|else|
   SaveCompT R [tst_src] [ComptNbr]
]

?section SaveCompT macro
== This is for, in my opinion, a rather interesting compile macro that compiles turnovers.
#push #out
#set  #out zcompfil
#output %*%
#pop #out
COMMENT  rename [tst_src],TURNOVER.[tst_src] ?section SetPw   macro
var Param1 Param2
#set Param1 %1%
#set Param2 %2%
[#case [#chargetv Param1 1 1] |$| var PcName [Param1] |otherwise| var PcServer [Param2]]
[#case [#chargetv Param2 1 1] |$| var PcName [Param2] |otherwise| var PcServer [Param1]]
[#if [#emptyv PcName] |then|  
   var PcName [#input Enter the Pathway System: ($MNTF):]
]
[#if [#emptyv PcServer] |then|
   var PcServer [#input Enter the Pathway Server (TESTPOST-SERVER):]
]

?section DebugOn macro
== * DebugOn [$PW] [server-name]
SetPw %*%
freeze     [PcName] [PcServer]
go pathcom [PcName];alter [PCServer],hometerm [#myterm],debug on
thaw       [PcName] [PcServer]

?section Freeze macro
SetPw %*%
go pathcom [PcName];freeze [PCServer]
go pathcom [PcName];stop   [PCServer], delay 10 secs

?section Thaw   macro
SetPw %*%
go pathcom [PcName];thaw [PCServer]

?section DebugOff macro
== * DebugOff [$PW] [server-name]
SetPw %*%
freeze     [PcName] [PcServer]
go pathcom [PcName];alter [PCServer],hometerm $VHS, debug off
thaw       [PcName] [PcServer]

?section set_SysIni macro
var CdVol          $DEV2.TEST
var LstVol         $DEV2.TESTLST
var SrcVol         $DEV2.TESTSRC
var TST_EXE        $DEV2.TESTOBJ.[SrcFile]O
var ObjVol         $DEV2.TESTOBJ
var TST_REN        $DEV2.TESTOBJ.[SrcFile]X
var TST_OBJ        $DEV2.TESTOBJ
var TST_POBJ       $DEV2.TESTOBJ.xxx1
var ObeyFile_VOL   $DEV2.TESTOBEY

?section LIB macro
GO VOLUME [TST_LIB]
?section LST macro
GO volume $DEV2.LISTING

?section SRC macro
[#if [#empty %1%] |then|
  GO volume $DEV2.SOURCE
|else|
  var  SrcFile %1%
]

?section OK macro
 [#case [#input RUN %*% (y)?] |y Y| GO %*% |otherwise|]
 #output ---------------------------------------------

?section PCLS macro
 SPOOLCOM $SPLS;JOB (OWNER),DELETE !
 SPOOLCOM $PPLS;JOB (OWNER),DELETE !

?section SV macro
 FUP SUBVOLS %*%

?section Type macro
 fup copy %1%

?section p macro
[#if [#empty %1%] |then| peruse $PPLS |else| peruse $SPLS]

?section InfoDefine macro
#frame
#push    X1 X2 X3 X4
#setMANY X1 X2 X3 X4,[#defineinfo %1%]
#output/HOLD/ADD DEFINE %1%
#output/HOLD,COLUMN 25/,CLASS [X2]
#output/COLUMN 40/,[X3] [X4]
#unframe
[#if [#empty %2%] |then| |else| INFODEFINE %2 to 99%]

?section CreateDefines macro
PURGE XD
INFO/OUT XD/DEFINE =*
EDIT XD;DQN/=/;CQ/ Define Name / INFODEFINE /A;E
PURGE DEFINES
#push #OUT
#set #OUT DEFINES
O XD
#pop #OUT
EDIT DEFINES;DQ/INFODEFINE/;E
EDIT DEFINES
[#if [#empty %2%] |then| |else| INFODEFINE %2 to 99%]

?section ST macro
[#IF [#EMPTY %1%]
|then| STATUS *,TERM
|else| STATUS %*%
]

?section DelY    macro
[#IF [#FILEINFO/EXISTENCE/%1%] |then|
   FILEINFO %1%
   [#CASE [#INPUT Do you wish to delete this (y)?]
      |y Y| purge %1%
      |otherwise|
   ]
]

?section COMPARE macro
$DEV2.testobj.COMPARE %*%

?section PC macro
[#if [#empty %1%]
|then| GO pathcom [PcName]
|else| #set PcName %*%
       GO pathcom %*%]

?section OBJ macro
Go VOLUME $DEV2.TESTOBJ

?section TL macro
Go LOAD/KEEP 1/$DEV2.COMPILES.ZMACROS

?section GT macro
edit $DEV2.COMPILES.ZMACROS;set tabs 10 20 30 40 50 60 70;%1 TO 9%

?section CD macro
var CdVol %1%
volume [CdVol]

?section G macro
var GSrc %*%
EDIT;SET TABS 10 20 30 40 50 60 70;SET JOIN 80;G [GSrc]

?section O macro
var ObeyFile %1%
[#if [#emptyv ObeyFile] |then|
     #output ([ObeyFile]) doesn't exist.
|else|
   [#if [#fileinfo/existence/[ObeyFile]] |then|
      #push Found
      edit /OUTV Found/[ObeyFile] R;LB/?section/RB/ ROUTINE/;E
      [#if [#linecount Found] > 2 |then|
         GO T [ObeyFile]
      |else|
         GO OBEY [ObeyFile]
      ]
      #pop  Found
   |else|
      #output The default Obey File hasn't been set yet. Try: O obeyfile
   ]
]
[#if [#empty %2%] |then| |else| O %2 to 99%]

?section BYE       macro
CSAVE
LOGOFF

?section CLOAD     macro
#push MyVol
#set  MyVol [#DEFAULTS]
VOLUME
OBEY DEFAULTS
VOLUME [MyVol]
#pop MyVol

?section CSAVE     macro
#push WS_VOLUME
#set  WS_VOLUME [#DEFAULTS]
VOLUME
#frame
#push #INLINEPREFIX
#set  #INLINEPREFIX --
edit/INLINE/DEFAULTS !
-- DQ ! F/L
-- 101 /#set PCName      [PCName]/
-- 102 /#set PCServer    [PCServer]/
-- 103 /#set SrcFile     [SrcFile]/
-- 104 /#set ObeyFile    [ObeyFile]/
-- 105 /#set CdVol       [CdVol]/
-- 106 /#set SrcFile     [SrcFile]/
-- 107 /#set COut        [COut]/
-- 108 /#set GSrc [GSrc]/
-- 109 /#set CdVol       [CdVol]/
-- E
VOLUME [WS_VOLUME]
#unframe

?section FILESPEC macro
[#if [#fileinfo /existence/ %1%] |then|
    #output /hold/ [#fileinfo/fullname/ %1%]
    #output /column 35,hold/
    [#case [#fileinfo /filestructure/ %1%]
         |0| #output /hold/ U:
         |1| #output /hold/ R:
         |2| #output /hold/ E:
         |3| #output /hold/ K:
         |otherwise| ]
    #output /column 37,hold/ [#fileinfo/eof/ %1%]
    #output /column 44,hold/&
        [_CONTIME_TO_TEXT [#CONTIME [#fileinfo/modification/%1%]]]
    #output /column 72,hold/ [#fileinfo/owner/ %1%]
|else|
    #output /hold/ File %1% does not exist ]
#output

?section SCUPINFO macro
#frame
#push OUTLIST
SCUP /OUTV OUTLIST/INFO %*%
#output [#LINEGET OUTLIST 1 FOR 1]
#output [#LINEGET OUTLIST 5 FOR 1]
#unframe

?section PRINT macro
FUP COPY %1%,$P
[#if [#empty %2%] |then| |else| PRINT %2 to 99%]

?section SQCOST macro
SQLCOMP/IN $DEV2.TESTOBJ.%1%,OUT $P.#SQCOST/ &
STOREDDEFINES EXPLAIN PLAN NORECOMPILE

?section LOG macro
[#if [#empty %1%] |then|
  EDIT $DEV2.TEST.LOG2009;XVS L-20;E
|else|
  #frame
  #push #out
  #set  #width 230
  #push  wYY wMM wDD wHH wMI
  #setmany  wYY wMM wDD wHH wMI, [#contime [#timestamp]]
  [#IF [wYY]< 10 |then| #set wYY 0[wYY]]
  [#IF [wMM]< 10 |then| #set wMM 0[wMM]]
  [#IF [wDD]< 10 |then| #set wDD 0[wDD]]
  [#IF [wHH]< 10 |then| #set wHH 0[wHH]]
  [#IF [wMI]< 10 |then| #set wMI 0[wMI]]
  #set  #out $DEV2.TEST.LOG[wYY]
  #output [wMM]/[wDD]/[wYY] [wHH]:[wMI]-> %*%
  #set  #width 80
  #pop  #out
  #unframe
]

?section sv macro
fup subvols %1%

?section CLS macro
#frame
 [#DEF ascii STRUCT
  BEGIN
  BYTE byt5(0:1)
   value 27 73;
  CHAR clr(0:1)
   redefines byt5;
  END;
 ]
#output [ascii:clr(0:1)]
#unframe

?section IMP     macro
var tst_src %1%
[#if [#fileinfo/existence/[tst_src]] |then|
    GO fup dup [tst_src], $tech1d.turnover.[tst_src],purge
]
[#if [#empty %2%] |then| |else| IMP %2 TO 99%]

?section GL      macro
var tst_src %1%
purge x
edit listing.[tst_src] p x

?section GS macro
var tst_src %1%
EDIT;SET TABS 10 20 30 40 50 60 70;SET JOIN 80;G [tst_src]
?section FS ALIAS
FINDDATA

?section CALC ALIAS
COMPUTE

?section dir ALIAS
fileinfo

?section fs alias
 finddata

?section grep alias
 finddata

Sony played this mind-blowing video at their executive conference. 
Be prepared to be startled by facts.
 http://www.youtube.com/watch?v=cL9Wu2kWwSY 
In the next decade, computers will become more intelligent than we are.
The questions that rise are:
- What kind of child are we giving birth too? When they pass us in intelligence? Will they continue to be our tool?
- As the world of information continues to unfold, what will we learn about ourselves and this life?
- Where are we going as a species? Will silicon life out live carbon life? 
- Who will be controlling our direction, or will it all be just a series of actions with no direction at all?
- Finally, after we learn how to conquer death (and we will), what will our new fears become?
These, and more questions will be answered...in the future.

C Data Types	found in Guardian C/C++ Programmers manual
#pragma XMEM	default for TNS C compilers, specifies a 32 bit model. NOXMEM specifies a 16 bit model.
#pragma NOWIDE	changes the size of int, long and short to 16 bit. Only valid for #pragma NOXMEM which we don't use.

To call Guardian Procedures you should include
#pragma EXTENSIONS
#include
In a scrape with compatability problems, use the #pragma OLDCALLs. This specifies the pre C00 parameter order for old programs.

Best practices.
Don't use int. use long or short instead.
Put environment specific functions in an #include .
Avoid HP specific, and C extensions to data types if possible.
Use unsigned only for short and long.

Abbreviation	Long forms	Usage
bool	bool *	Non Ansi
char	char	Ansi - 1 byte (8 bits)
short	short	Ansi - 16 bit integer. Preferred usage.
	signed short
	short int
	signed short int
long	long	32 bit integer. Preferred usage.
	signed long
	long int	Don't use this
	signed long int	Don't use this
int	int, signed, signed int	32 bits, 16 bits with nowide. Don't use this. Use short instead.
unsigned short	unsigned short	16 bit integer
	unsigned short int
unsigned	unsigned
	unsigned int
unsigned long	unsigned long
	unsigned long int
unsigned long long	unsigned long long	Non Ansi. unsigned 64 bit integer.
long long	long long	64 bit. Used when decimal numbers are is followed by ll or LL modifier
decimal	decimal	Non Ansi. Only for programs with #pragma SQL and #include
float	float	Single precision
	float float	Single precision
double double	double	Double precision
long double	long double
Data Types
char	1 byte
int	16 bit integer
float	single precision
double	double precision
short	16 bit integer
long	32 bit integer
signed	+/-
unsigned	+
*int, *float	pointer to int, float
enum	enumeration constant
const	Unchanging constant
extern	Declare an external variable
register	Declare a register
static	Local variable
void	No value
structure	Define a structure
typedef x	Create a name of a data type
sizeof x	Size of an object
sizeof (x)	Size of a data type
&var	Use the variable at this address

There are 2,201 bugs in this code segment

!From http://docs.hp.com/en/524521-012/524521-012.pdf, Page 157

#include <in.h>
#include <netdb.h>
#include <stdio.h>
#include <errno.h>
#include <stdlib.h>
#include <cextdecs(AWAITIOX, FILE_GETINFO_)>
..
struct sockaddr_in fhost;
int len,rsock;
char buffer [8*1024];
short error, rsock2, rcount;
long tag;
..
error = recvfrom_nw(rsock, buffer, sizeof(buffer), 0,
(struct sockaddr *) &fhost, &len, tag);
if error (!= 0) /* some error checking */
{
printf ("recvfrom_nw failed, error %d\n," errno);
exit (1);
}
rsock2=(short)rsock; /* AWAITIOX/FILE_GETINFO_ expects a short
for socket descriptor */
(void) AWAITIOX (&rsock2,,&rcount,&tag,1l);
(void) FILE_GETINFO_ (rsock2, &error);
if (error != 0)
{
printf ("error from AWAITIOX, error %d\n", errno);
exit (1);
}
error = socket_get_info (rsock, (char*) &fhost, len);
if (error != 0)
{
printf ("socket_get_info failed, error %d\n", errno);
exit(1)
}

C / TAL Comparisons (Using SEND_NW as an example):
C Synopsis, used for data type comparisons
#include <....lost in html conversion>
#include <...lost in html conversion>
error = send_nw (socket, nbuffer_ptr, nbuffer_length, flags,tag);
int error, socket;
char *nbuffer_ptr;
int nbuffer_length, flags;
long tag;
C / TAL Comparisons (Using SEND_NW as an example):
C Synopsis, used for data type comparisons
#include <....lost in html conversion>
#include <...lost in html conversion>
error = send_nw (socket, nbuffer_ptr, nbuffer_length, flags,tag);
int error, socket;
char *nbuffer_ptr;
int nbuffer_length, flags;
long tag; Tal Synopsis, used for data type comparisons
?NOLIST, SOURCE SOCKDEFT
?NOLIST, SOURCE SOCKPROC
error := send_nw (socket, nbuffer_ptr, nbuffer_length,
flags, tag);
INT(32) error, socket;
STRING .EXT nbuffer_ptr;
INT(32) nbuffer_length,
flags;
INT(32) tag;

-- This is a comment
! This is a comment
! This is a bracketted comment !
STRING         - 1 bytes integer 0 to 255, EG STRING(2) x; is a 2 byte ascii string
INT            - 2 bytes, 0 to 65,535 or -32,768 to + 32,767. This can also be a string EG: INT twochars := "CH";
INT(32)        - 4 bytes
UNSIGNED(1~15) - n bits, 0 thru (2**n - 1)
UNSIGNED(16)   - 0 to 65,535, or -32,768 to +32,767. This is your standard address
FIXED          - 8 bytes, for FIXED(0) or FIXED(*) the range is -9 kazillion to +9 kazillion
REAL           - 4 bytes, precise to 9 digits
REAL(64)       - 8 bytes, precise to 17 digits

INT(16)   is the same as INT
INT(64)   is the same as FIXED(0)
REAL(32)  is the same as REAL

Examples:
LITERAL double_word = (4 * 8);
INT    (double_word) num; ! num is a INT(32)
INT       x := 4                  ! x is decimal 4
INT       x := %177               ! x is Octal 177
INT       x := %B01010            ! x is Binary 01010
INT       x := %B0000000000000010 ! x is 2;
INT       x := %B1111111111111110 ! x is -2 (using twos compliment);
INT       x := %H1A               ! x is Hex 1A
FIXED(3)  x := 0.642F;            ! x is 642000, the  3 shifts the decimal right
FIXED(-3) x := 642945F;           ! x is 642000, the -3 shifts the decimal left
FIXED(*)  x := 123                ! x is stored, not scaled

BLOCK  x                       ; ! Declare Global Variables
     INT        flag    := TRUE;
     INT(32)    index   := 22  ;
END BLOCK                      ;
BLOCK PRIVATE                  ; ! Declare Local Variables
     INT        myflag  := TRUE;
     INT(32)    myindex := 22  ;
END BLOCK                      ;

PROC paragraph_x   ; FORWARD   ; ! Declares that paragraph_x will be out of compile sequence
PROC called_program; EXTERNAL  ; ! Declares that a paragraph can be found in a called program
PROC paragraph_x (param)       ;
BEGIN
     INT param;
END;

PROC paragraphs_nested (param) ;
BEGIN
  ENTRY entry_point              ; ! Declares a programs entry point
  some code
  SUBPROC entry_subroutine(x)    ; ! Declares a subroutine with a PROC
     BEGIN
     some code  
     END;
  entry_point:
     some more code
END;

PROC myproc;
BEGIN !Local data declarations
   SUBPROC some_sub (param); !Declare subprocedure 
      INT param; 
      ENTRY sub_entry;         ! Declare entry-point identifier
      INT var;                 ! Some code here 
   sub_entry:                  ! Apply entry-point
      var := var - param;      ! identifier to statement 
      some code         ;      ! Tal can get ugly very quickly
   END;                        ! End subprocedure 
   some code 
   !Local statements
   CALL sub_entry (1); !Call entry-point SUB_ENTRY 
   END;

PROC xx(v1,v2,v3);
BEGIN...END;
...CALL xx(v1, !nothing!, v3) ! Comments help document ommited variables

DEFINETOG omit                !
some code
?IF omit
some code
?ENDIF omit

Sample compile statement: suppress octal code after each line, suppress all but header information, compile for syntax only
   and puts the errors in a file called xxx, and sets the omit toggle on
TAL/in myprogram/;nocode, suppress, syntax, errorfile xxx,settog omit,

Operators:
  x  := 2     ! move 2 to a number
  x ':=' 'AB' ! move characters to a string
  x := @var   ! x is the address of var
  .x          ! convert x from a INT to the word address of another variable
  <<          ! Signed Left shift
  '<<'        ! Unsigned Left shift
  + - *       ! Signed operators for add, subtract and multiply
  '+' '-' '*' ! Unsigned operators for add, subtract and multiply
  = <= >=     ! comparisons
  '=' '<='    ! comparisons (unsigned)
  <>          ! Not equal

According to the manual, you can do math on a string variable. EG: STRING x; x ':=' 'A"; x := x * 2; Go figure?

But only 1,022 bugs in this code segment..

It was nice hanging with you guys.
Goodbye for now: Jeff, Jennifer and Glen.
We took Jennifer to the airport.
She went to Vegas and we went to the Moon Township. We never got a good chance to take her to Mars.  (I'm serious)
While at the airport, Jen got into a little bit of trouble. It was her first time flying alone. She misplaced her ticket and her birth certificate down some place.
A nice couple saw that she was in trouble and offered their help.
In the end, the security office had her documents, and Jennifer and the couple flew off too Vegas.
The couple was from...you guessed it, Pittsburgh.
Pittsburgh people are the best!